Zanussi ZBF22451SA Notice D'utilisation page 17

Climate
Ambient temperature
class
SN +10°C to + 32°C
N +16°C to + 32°C
ST +16°C to + 38°C
T +16°C to + 43°C
Some functional problems might occur
for some types of models when
operating outside of that range. The
correct operation can only be
guaranteed within the specified
temperature range. If you have any
doubts regarding where to install the
appliance, please turn to the vendor,
to our customer service or to the
nearest Authorised Service Centre.
ELECTRICAL CONNECTION
• Before plugging in, ensure that the voltage and
frequency shown on the rating plate correspond
to your domestic power supply.
• The appliance must be earthed. The power
supply cable plug is provided with a contact for
OPERATION
CONTROL PANEL
Display
1
Temperature warmer button
2
Temperature colder button
3
OK
4
It is possible to change predefined sound of
buttons by pressing together Mode and
this purpose. If the domestic power supply
socket is not earthed, connect the appliance to
a separate earth in compliance with current
regulations, consulting a qualified electrician.
• The manufacturer declines all responsibility if
the above safety precautions are not observed.
• This appliance complies with the E.E.C.
Directives.
VENTILATION REQUIREMENTS
The airflow behind the appliance must be sufficient.
1
6 5 4
Mode
5
ON/OFF
6
temperature colder button for a few seconds.
Change is reversible.
min.
5 cm
2
200 cm
CAUTION! Refer to the assembly
instructions for the installation.
3 2
min.
2
200 cm
17