Hkoenig STW26 Manuel D'utilisation page 5

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 8
shows current time. If it has not been manually disconnected at the completion of
brewing. For an optimum coffee taste, serve it just after brewing.
10. Always turn the coffee maker off and disconnect the power supply when not use.
Caution: When pour coffee, the momentary inclined angle of jug shall not be more
than 45 degree from the vertical position, you shall pour the coffee slowly until the
jug is empty, otherwise the coffee in the jug will rush to the bottom of jug lid, and the
coffee will flow out from two edges of lid and hurt person!
AUTOMATIC START FUNCTION
If you do not want the coffee maker to start operation immediately, for example now
it is 12:00, you hope that the coffee maker will automatically start at 13.03 in the
evening, first follow steps 1 to 5 of above section, and then you can set the automatic
start function as follows:
1. Press Set Delay button one time, the word Clock is showed at the up-right corner
on display.
2. Press the Hour and Minute button continuously to set the present time (real clock),
that is 12.00, (See fig. 1). If you not press and hold the Hour and Minute button for
15S, the word CLOCK will not showed on display.
Note: the time cycle is 24 hours.
3. Press Set Delay button again and the word Time shows on
up-left corner of display.
4. Set the delayed starting time by pressing Hour and Minute
Fig. 1
button repetitively, that is 13:03(see Fig. 2).
5. After setting the presetting time, press the Set Delay button
once, the letter TIMER on the LCD will disappear. The LCD will
display the current clock. The unit will begin to brewing coffee
when the delayed brew time come.
6. Press the on/off button once, the indicator in it will
illuminate blue.
Fig. 2
Note: You may cancel the automatic start function by pressing on/off
button once to stop machine, if you want to brew coffee again
immediately, you shall press on /off button once to start brewing immediately. If you
want to change the automatic start time, only following the above 1-4 steps again.
When the time is due the indicator will illuminate green, then the unit starts brewing.
The blue background indicator will be distinguished after brewing within 15mins and
display shows current time. If it has not been manually disconnected at the
completion of brewing.

Publicité

Table des Matières
loading

Table des Matières