Technical Data; Original Declaration Of Conformity - Weller WT 2M Traduction De La Notice Originale

Technical Data

Soldering station
Dimensions L x W x H
Fuse
Weight
Power consumption
Temperature range
Tool dependent
Overload cut-out (150 W)
To avoid overloading a WT 2M station the power is limited to
150 W (see matrix 10). With a required tool performance of
both channels of more than 150 watts, a channel is automati-
Symbols
Caution!
Warning! Risk of burns!
Read the operating instructions!
ESD-compatible design and ESD-compatible
workstation
Equipotential bonding
Fuse
1.800.561.8187
WT 2M
(mm) 150 x 130 x 101
(Inch) 5.91 x 5.12 x 3.98
230 V (A) T0,8
120 V (A) T1,6
100 V (A) T2,0
(kg) 2,92 kg
( V / Hz) 230 /50; 120 /60;
100 /50 /60
(W) 150
I, antistatic housing
III, Soldering tool
(°C) 50 - 450 / 550
(°F) 150-850 / 950
(°C/°F) ± 9 / ± 17
(°C/°F) ± 2 / ± 4
www.
Disposal
Do not dispose of electric tools together with
household waste material! In observance of Eu-
ropean Directive 2012/19/EU on waste electrical
and electronic equipment and its implementation
in accordance with national law, electric tools that
have reached the end of their life must be collec-

Original declaration of conformity

Soldering station WT-2M
We hereby declare that the products described herein
comply with the following guidelines:
2014/35/EU, 2014/30/EU, 2011/65/EU (RoHS)
Applied harmonised standards:
DIN EN 60335-1: 2012-10
DIN EN 60335-2-45: 2012-08
DIN EN 62233: 2008-11 / 2009-04
DIN EN 55014-1: 2012-05
DIN EN 55014-2: 2009-06
DIN EN 61000-3-2: 2015-03
DIN EN 61000-3-3: 2014-03
DIN EN 50581:2013-02
Besigheim, 2018-02-14
T. Fischer
Authorised to compile technical documentation.
Weller Tools GmbH
-
information@itm.com
.com
EN
ENGLISH
B. Frühwald
21