Caring For Your Brewer; Cleaning The Cold Water Reservoir - Keurig Hot Classique Série Guide D'utilisation Et D'entretien

CARING FOR YOUR BREWER

Regular cleaning of the brewer's external components
is recommended.
• Brewer external housing
• Drip Tray
• Drip Tray Plate
Important: Make sure the brewer is unplugged before cleaning.
CLEANING THE BREWER EXTERIOR
Never immerse brewer in water or other liquids. Clean
the external housing of the brewer and other external
components with a damp, non-abrasive, lint-free cloth.
CLEANING THE DRIP TRAY AND DRIP TRAY PLATE
When the red Drip Tray Overfill indicator appears, the Drip
Tray is almost full. Carefully remove by sliding tray toward
you. Empty contents into the sink. Inspect the Drip Tray
periodically and clean with a damp, non-abrasive lint-free
cloth. Do not put the Drip Tray or the Drip Tray Plate in the
dishwasher.
14

CLEANING THE COLD WATER RESERVOIR

It is normal over time for discoloration, spotting, or staining to appear in the Cold Water
Reservoir. Results will vary depending on the mineral content of the water used but will not
affect the operation of the brewer. However, be sure to clean the Cold Water Reservoir
regularly to minimize build-up.
To access the Cold Water Reservoir, lift the Lid. Remove the Water Level Guide and then
clean inside the Reservoir with a damp, non-abrasive lint-free cloth as necessary.
Replace the Water Level Guide and lower the Lid when finished.
The Water Level Guide is not dishwasher safe.
2 | TIPS & MAINTENANCE
15