Setting The Time; Turning The Radio On/Off - LENCO CRW-1 Mode D'emploi

1. Press TIME SET button, the clock is blinking
△ Press HOUR to set the hours.
Pressing the button once will change the time by one hour. If you press and hold the
button, the hours will change until you let go.
△ Press MINUTE to set the minutes.
Pressing the button once will change the time by one minute. If you press and hold the
button, the minutes will change until you let go.
2. Press the TIME SET button to confirm.
Turning the mood light on/off
While it is switched on, the mood light runs through the colours of the rainbow.
△ Set the RAINBOW LIGHT DIM switch to...
...LIGHT to turn the mood light on.
...DIM to dim the mood light.
...OFF to turn the mood light off.
If you have set an alarm, the mood lighting will switch on with the alarm, even if you
have switched it to OFF.

Turning the radio on/off

1. To turn the radio on press POWER. The frequency currently tuned in will be shown on the
display.
2. To change the frequency turn the TUNING dial left or right using < or >.
3. To set the volume turn the VOLUME dial left or right using – or +.
△ To turn the radio off press POWER again.
If you want to check clock time while radio is on (not alarm activated situation),
SNOOZE.
Setting an alarm
Setting the alarm time
1. Press ALARM SET button, AL TIME "7:00" is blinking.
△ Press HOUR to set the hours.
Pressing the button once will change the alarm time by one hour. If you press and hold the
button, the hours will change until you let go.
△ Press MINUTE to set the minutes.
Pressing the button once will change the alarm time by one minute. If you press and hold
the button, the minutes will change until you let go.
2. Press the ALARM SET button to confirm.
Choosing an alarm

Setting the time

10
press