Listening To Radio; Clock Setting - LENCO CRW-1 Mode D'emploi

Eng
Description of Parts
1. POWER button Turn the unit On and OFF.
2. MELODY switch Select melody (sound effect) source 1,2 or 3.
3. AL SOUND switch Select alarm source MELODY/RADIO/BUZZER.
4. VOLUME wheel Adjust volume level up or down.
5. TUNING wheel Tune the radio channel frequency up or down.
6. BAND switch Select radio FM / AM (MW).
7. LCD BACKLIGHT switch Select LCD backlight OFF/DIM/LIGHT.
8. RAINBOW LIGHT switch Select dome rainbow light OFF/DIM/LIGHT.
9. ALARM SET button Select alarm time setting mode.
10. SLEEP button Select the time duration of the sleep timer.
11. SNOOZE button Activate the snooze function.
12. ALARM ON/OFF button Switch the alarm ON or OFF.
13. DOWN button Set Minute value of Clock and Alarm time.
14. UP button Set Hour value of Clock and Alarm time.
15. TIME SET button Select clock setting mode.
16. Rainbow Light Dome
17. LCD display
18. Speaker
19. Battery Compartment
20. DC-in jack For the connection of external DC power supply
21. FM Antenna wire
22. RESET button Reset the unit.

Clock Setting

Setting Clock Time
1. Press and Hold the TIME SET button then press UP button to set Hour.
2. Press and Hold the TIME SET button then press DOWN button to set
Minute.
3. After the clock time is set, release the TIME SET button.
8

Listening to Radio

Radio Operation
Fully extend the FM Antenna wire for the maximum reception.
1. Press the POWER button to turn on the Radio.
2. Slide the BAND switch to select FM or AM(MW) band.
3. Rotate the TUNING wheel and tune to a desired station.
4. Adjust the sound level by rotating the VOLUME wheel.
Alarm Clock Setting
Setting Alarm Time
1. Press and Hold the ALARM SET button then press UP button to set Hour.
2. Press and Hold the ALARM SET button then press DOWN button to set
Minute.
3. After the alarm time is set, release the ALARM SET button.
4. Slide the AL SOUND switch to select desired alarm sound source.
(a) Wake to Buzzer;
(b) Wake to Radio Ensuring the desired radio channel tuned and adjust
to a desired alarm volume level by rotating the VOLUME wheel,
(c) Wake to Melody You may slide the MELODY switch to select one
of the three Melody (sound effect).
5. Press the ALARM ON/OFF button to enable the alarm function. The alarm
indicator stays on.
Wake to Buzzer
If the AL SOUND switch is set to BUZZ, the Buzzer will sound for one hour.
Wake to Radio
If the AL SOUND switch is set to RADIO, the alarm will wake up to the tuned
FM or AM (MW) radio station and play for one hour.
Wake to Melody (sound effect)
If the AL SOUND switch is set to MELODY, the selected melody will sound
for one hour.
When the alarm sounds, the rainbow colour light changes in higher speed.
You may activate the Snooze function manually after the alarm sounds by
pressing the SNOOZE button. The snooze time is approximately 5 minutes
and snooze may be manually activated with 1hour alarm interval and after 1
hour reset to the next day.
After the alarm sounds, you may also press the ALARM ON/OFF button to
stop it immediately. It will reset itself for the following day.
9
Eng