Technical Specifications - LENCO CRW-1 Mode D'emploi

SLEEP sign.
△ To turn the sleep timer function off, press SLEEP repeatedly until the SLEEP sign disappears
from the display.
△ To turn the radio off during the sleep timer period chosen, press POWER.
Not working
Wrong time displayed
Alarm clock does not
work or goes off at the
wrong time enough?
Radio switches off
suddenly
DANGER-risk of electric shock
• Unplug the mains adapter before cleaning the appliance.
•
The appliance and mains adapter must not come into contact with water. Also protect
both from drops and splashes of water.
CAUTION-material damage
Never use caustic chemicals, or aggressive or abrasive products for cleaning.
Clean the casing as required with a soft, dry cloth.
△
Model:
Mains adapter:
Back-up batteries:
Max. power output:
Frequency ranger:
Light source:
Ambient temperature:
Power supply adaptor (For EU Only)
Fault/Remedy
Is the mains adapter plugged in properly?
Have back-up batteries been inserted?
If there has been a power cut, all settings will be lost.
Has the alarm been set properly the alarm function
switched on (alarm symbol in display)?
Is the radio tuned in? Has the volume been set high?
Have back-up batteries been inserted?
If there has been a power cut, all settings will be lost.
Was the sleep timer on? Press POWER to turn the radio
back on.
Cleaning

Technical specifications

CRW-1
Input:100-240V~50/60Hz
Output: 6V DC 500mA
2x AAA (UM-4) x 2 Batteries
0.5W RMS
FM87.5-108MHz
LED (not replaceable)
+10 to+40°C
12