Charging The Batteries - Datalogic Dragon M Série Guide Rapide

DRAGON™ M

CHARGING THE BATTERIES

Once the OM-DRAGON™ is powered, you can charge the laser gun's
batteries:
Place the DRAGON™ M into the OM-DRAGON™ cradle. The red LED on the
cradle goes on.
The battery is completely charged when the green LED on the cradle goes on.
After many recharging cycles NiMh and NiCd batteries may tend to lose their
operating autonomy. This condition can be overcome by inserting the
DRAGON™ M into the OM-DRAGON™ / C-DRAGON™ charger and pressing the
"battery reconditioning" button (see below).
When the above procedure is no longer effective, the batteries must be
changed. To change the batteries of your laser gun, unscrew the battery cover
screw, replace the old batteries with new ones, then screw the battery cover
back into place. (See the following figures).
Battery cover
screw
CAUTION
Dispose of used batteries as required by the relevant laws
in force.
NiMh, NiCd or Alkaline
Battery
reconditioning
button
+
UK/US
5