Configuration - Jeti Mezon PRO 50A BEC Notice D'utilisation

4 Configuration

4.1 Channel assignment procedure via EX bus
1. In the receiver, set the particular channel (namely EXT / E1 /
E2) to EX Bus
2. Set the "EX Bus Control" to "On-Auto" in the "Device
Explorer" -> "Mezon Pro" -> "Main Settings" menu and
then confirm "Edit"
3.
Move the throttle which you want to use to control the
Mezon Pro on the transmitter
If the procedure is successful,
"Throttle Channel" expresses
the number of the assigned
channel and its output. The
default setting of the Fail-Safe
function is to turn off the
engine (Fail-Safe mode) after
0.3 seconds (Delay) without
brake. The delay and the Fail-
Safe mode can be customized by the user.
4.2 Brake setting
You set the controller brake in the "Device Explorer" -
•
>"Mezon Pro" -> "Brake Adjustment" menu with the
following options:
www.modellmarkt24.ch www.modellmarkt24.ch
21
EN