To Remove A Shelf - AVG TBWC-110S4 Manuel D'utilisation

TO REMOVE A SHELF

To remove a sliding shelf:
1. Remove all bottles.
2. Pull out the shelf.
3. Take out shelf by lifting the right side bracket and lowering the left side bracket, then pull out.
RECOMMENDATIONS FOR LAYOUT AND STORAGE OF YOUR WINE CABINET

Your cabinet was designed to store a maximum number of bottles in total security.
recommend that you observe the tips to optimize loading.

Spread your bottles out as evenly as possible over the shelves, so that the weight is not
concentrated in one area; also, make sure your bottles do not touch the back of the cabinet or
the step at bottom.

Make sure that the bottles are not all grouped together at the top or bottom of the cabinet.

Observe the loading instructions provided in section 5, according to the type of storage fixtures
with which your cabinet is equipped. NEVER STACK BOTTLES ON A SLIDING SHELF.

Never try to pull out more than one sliding shelf at a time.
PLEASE NOTE
Before modifying your cabinet's original configuration in any way, be sure to ask your dealer for advice.
25
We