Caution; Replacement Parts - Weller WSA350EU Mode D'emploi

English
Thank you for placing your trust in our company by
purchasing the Weller WSA350EU Smoke Absorber.
Production was based on stringent quality requirements
which guarantee the perfect operation of the device.

1. Caution!

Please read these Operating Instructions and the attached
safety information carefully prior to initial operation. Failure
to observe the safety regulations results in a risk to life and
limb.
The manufacturer shall not be liable for damage resulting
from misuse of the machine or unauthorised alterations.
The Weller WSA350EU Smoke Absorber corresponds to the
EC Declaration of Conformity in accordance with the basic
safety requirements of Directives 2004/108/EC and
2006/95/EC.
The unit includes 3 carbon-activated filters and is ESD safe.
2. Operation
1. Be sure the carbon-activated filter is in place. The cage
that holds the filter in place should be firmly latched.
2. Plug the unit in to a grounded 230-Volt receptacle
3. Position the smoke absorber so that it faces your
workspace. You can adjust the angle of the hood by
loosening the two knobs on either side of the unit.
4. Turn the unit on by flipping the rocker switch
located on the top of the housing.
5. To replace the filter, open the filter cage, insert a new
filter, and snap the cage shut. Discard the filter in accordance
with your plant's policies.
Technical data
Power Consumption:
Dimensions L x W x H:
Mains voltage:
Weight:
Voltage:
Wattage:

3. Replacement Parts

Cat. No. Description
WSA350F Carbon Activated Filter, 3 Per Pack
WARNING:
Solder and solder flux fumes and gases can behazardous to
you or others. Be sure to read and understand the solder and
flux manufacturers' warnings regarding these fumes.
5
20 W (50 Hz)
250 x 260 x 160 mm
(9.8 x 10.2 x 6.2 in.)
230 V
1,500 g (3.3 lb)
230 VAC
20 W
To reduce the risk of fire or electric shock, do not use this
fan with any solid state speed control device. Be sure to
unplug from the electrical supply source before cleaning and
servicing.
Subject to technical change without notice!
See the updated operating instructions at
www.weller-tools.com.