STARFRIT ROTATO Mode D'emploi page 4

HOW TO CHANGE THE BLADE
Rotato's blades are specially designed to give clean and easy peeling or
cutting. When the blade skips or jams, or is excessively clogged, it's time
to change blades.
1. Turn the Rotato upside down and open the blade storage compartment
located underneath the base. Pry loose the red plastic part, remove
one of the new blades.
2. Remove the cutter head by gently pulling the lock-in attachment
from the cutter arm.
3. Unlatch and slide the used blade away from the cutter head. Dispose
of the used blade using the same precautions taken with a sharp
razor.
4. Slide the new blade down the ridge of the blade holder. Made sure
the blade is solidly in place before proceeding to the next step.
5. Put the cutter head back on the Rotato by inserting the lock-in
attachment into the cutter arm.
FOR EASY CLEANING
Clean your Rotato with a damp, sudsy cloth. Be careful when cleaning
the sharp blade.
4