Filling The Cabinet - Gamko FK20/2i Mode D'emploi

Filling the cabinet
When filling the cabinet please ensure that the products inside do not
obstruct the air outlet or fan inlets, as this will reduce the circulation of
cold air.
• Re-fill the cabinet in the evening to allow maximum cooling time
before serving.
• Ensure that stock is rotated efficiently.
• To ensure maximum cooling time replenish stocks regularly rather
then once a day.
Warning!
For all actions in machinery or electric parts: ensure the plug is discon-
nected from the mains.
It is possible that sharp parts appear in the engine room. Be careful if
you have to do operations in the engine room. It is possible that part in
the engine room are very hot (100°C)
Convince yourself that all parts are chilled enough before you do opera-
tion in the engine room. Always mount eventual removed grids and/or
other parts on the same place as before.
Maintenance
The cabinet should be cleaned with look-warm water and a mild domes-
tic cleaner, never use abrasives or harsh chemicals.
Trouble shooting
Always check first whether the cabinet is properly plugged in and whether
the socket is live (e.g. by plugging in a different electrical appliance)
The temperature is too high (increases), with correctly set thermostat.
Possible causes 1. No power supply to cabinet
2. Airflow completely blocked
3. Door is not properly closed
4. The airflow trenches are covered
5. Evaporator is frozen up
19