Installation Of Viva L With Swivel Base - RAIS/attika Viva 100 L Manuel D'utilisateur

English

Installation of Viva L with swivel base

The stove is available with and without a swivel base.
If the stove is delivered with a swivel base, the swivel base must be mounted under
the stove and locked with 2 transport screws (thumbscrews).
The swivel base can be installed:
• at 90 degrees (45 degrees on each side)
- (factory default setting)
• at 360 degrees
When the stove rests in its place, remove the transport lock to
free the swivel base.
Remove both thumbscrews; the stove
can now rotate 45° each way.
Installing a 360° swivel base.
Remove the stop screw; the stove can
now rotate freely.
The swivel base lock (spring) can be
tightened by loosening the screw to
adjust the bracket. Move the bracket
toward the plus mark and remember
and tighten the screw.
13
Remove the plates on the rear side
of the stove.
attika
RAIS/ - User manual for VIVA L