CHI 13102 Manuel D'utilisation Et D'entretien page 6

How to Dry and Steam Iron
w CAUTION Burn Hazard: Attempting to steam iron on a lower
temperature setting or failing to allow the iron to preheat for
2 minutes can result in hot water dripping from the soleplate.
1. To Steam Iron: Unplug iron. Swivel Water Fill
Door left or right and add water to MAX fill line.
If you have extremely hard water, alternate
between tap water and distilled water for use
in the iron. Plug iron into outlet. Turn Fabric
Temperature Setting Dial to select desired
fabric setting in the steam range of the Fabric
Temperature Indicator.
To Dry Iron: Plug into outlet. Set Adjustable
Steam Lever to
Temperature Setting Dial to select temperature
on the Fabric Temperature Indicator.
2. Setting will blink at beginning and turn solid
(also beeps) when iron is ready to use. Preheat
2 minutes to reach desired temperature. You
are now ready to iron.
3. Set Adjustable Steam Lever to desired steam
setting when using steam to iron.
4. Turn Fabric Temperature Setting Dial until off is illuminated on
the Fabric Temperature/OFF ( ) Indicator. Unplug.
w CAUTION
Eye Hazard: Hold the plug with one hand while
pushing the Cord Retraction Button with your other hand to
retract the cord.
6
(Dry Iron). Turn the Fabric