Rear Panel - RCF BM 3003 Manuel De L'utilisateur

6
Power supply input (pin diameter ø: 2.0 mm) to be used on all BM 3003
paging microphones of the line, but the first one (that is already directly
supplied by the ES 3323 amplifier).
VOLTAGE: either 24 V dc (max. current per each BM 3003: 150 mA)
or 18 V ac (max. current per each BM 3003: 200 mA).
7
RJ 45 input for the CAT5 cable coming from the ES 3323 amplifier or
the previous BM 3003 paging microphone.
PINS: 1. Audio signal (–, cold)
2. Audio signal (+, hot)
3. Enable
4. Ground
8
RJ 45 output to connect the next BM 3003 paging microphones
(through CAT 5 cable).
6
8
5. Power supply
6. Zone A request
7. Zone B request
8. Zone C request
7

REAR PANEL

6