Maintenance; General Information; Related Triscroll Manuals; Maintenance And Tooling Kits - Agilent Technologies TriScroll 600 Série Manuel D'installation Et D'opération

Pompe à vide sèche
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 17

Maintenance

General Information

Agilent TriScroll 600 series pumps are designed to provide years of trouble-free service if maintenance procedures and
intervals are observed. Bearing grease replenishment and tip seal replacement is recommended when pump base pressure
has risen to an unacceptably high level for your application. Bearings, rotary seals and o-rings should also be replaced if
the pump exhibits humming or grinding noises from the bearings. Main bearing life may be shortened if your application
requires the pumping of high quantities of water vapor. Use of the bearing purge kit (PTSPURGEKIT) mentioned earlier will
keep this water from impacting bearing life.
Maintenance should be performed in accordance with procedures, tooling and materials specified in the manuals listed
below.

Related TriScroll Manuals

Other manuals related to tip seal replacement, pump module replacement, and major maintenance of the TriScroll 600
series pumps are listed in Table 21.
Tip Seal Replacement Manual
Pump Module Replacement Manual
Major Maintenance Manual

Maintenance and Tooling Kits

Material and tooling required to perform maintenance on TriScroll pumps is provided in kit form. A description of each kit
and ordering information is provided in Table 22.
Description
Major Maintenance Kit
Maintenance Tool Kit
Replacement Tip Seal Set
TriScroll 600 Series Vacuum Pump
Table 21
Title
Table 22
Contents
All bearings, bearing seals, bearing
lubricant, O-rings, and tip seals
required to rebuild TriScroll 600
series pumps.
All fixtures and tools required to
perform any maintenance on
TriScroll 600 Series pumps.
Replacement tip seals and static
O-rings for TriScroll 600 Series
pumps.
NOTE: The Maintenance Tool Kit is also required for tip seal replacement.

Other Related Manuals

Applicable TriScroll Model
All TriScroll 600 Series models
All TriScroll 600 Series models
All TriScroll 600 Series models

Maintenance and Tooling Kits

Applicable TriScroll Model
All TriScroll 600 Series models
All TriScroll 600 Series models
All TriScroll 600 Series models
Part Number
699904310
699904305
699904300
Part Number
PTSS0600MK
PTSS0600TK
PTSS0600TS
43

Publicité

Table des Matières
loading

Table des Matières