Beyerdynamic CUSTOM STREET Mode D'emploi page 8

Changing the Headband Pad
1. Pull the headband pad carefully upwards near to the rim of the head-
band and unclasp the middle clip.
2. Pull the headband pad from the left and right holders. While doing so,
bend the headband pad slightly.
3. Slide one end of the new headband pad into one of the holders.
4. Clasp the clip in the middle of the pad to the headband with an
audible "click".
5. Bend the headband pad slightly and slide the other end of the head-
band pad into the other holder.
lateral holder
Changing the Ear Pads
1. Grasp the ear pad inwards and outwards and pull it carefully off.
2. Press the new ear pad onto the housing shell.
1.
middle clip
headband pad
2.
– 8 –
lateral holder