Accessories - DeWalt DCST972 Guide D'utilisation

Moteur compatible avec les accessoires 60 v max
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Switching On and Off (Fig. A, G)
1. To turn the appliance on, push the lock-off tab
forward, squeeze the lock-off lever
variable speed trigger switch 
2. To turn the appliance off, release the variable speed
trigger switch and lock-off lever.

WARNING: Never attempt to lock the trigger in the
on position.
Speed Control Switch (Fig. A, G)
This powerhead gives you the choice to operate at a more
efficient speed to extend the runtime for larger jobs, or
accelerate the tool speed for high- performance needs.
1. To extend runtime, pull the speed control switch back
toward the battery housing into the "LO" position. This
mode is best for larger projects that require more time
to complete.
2. For high‑performance, push the speed control
switchforward toward the auxillary handle into the "HI"
position. This mode is best to for applications that need
higher RPM.
nOTE: When in "HI" mode, runtime will be decreased as
compared to when trimmer is in "LO" mode.
MAINTENANCE

WARNING: To reduce the risk of serious personal
injury, turn unit off and remove the battery pack
before making any adjustments or removing/
installing attachments or accessories. An
accidental start‑up can cause injury.
Cleaning

WARNING: Blow dirt and dust out of all air vents with
clean, dry air at least once a week. To minimize the risk
of eye injury, always wear ANSI Z87.1 approved eye
protection when performing this procedure.

WARNING: Never use solvents or other harsh
chemicals for cleaning the non‑metallic parts of the
tool. These chemicals may weaken the plastic materials
used in these parts. Use a cloth dampened only with
water and mild soap. Never let any liquid get inside the
tool; never immerse any part of the tool into a liquid.

Accessories


WARNING: Since accessories, other than those offered
by D
WALT, have not been tested with this product, use
e
of such accessories with this tool could be hazardous.
To reduce the risk of injury, only D
accessories should be used with this product.
Recommended accessories for use with your tool are available
at extra cost from your local dealer or authorized service
center. If you need assistance in locating any accessory, please
contact D
WALT call 1-800-4-D
e
visit our website: www.dewalt.com.
 3 
 2 
and then the
 1 
.
WALT recommended
e
WALT (1‑800‑433‑9258) or
e
Repairs
The charger and battery pack are not serviceable. There are
no serviceable parts inside the charger or battery pack.

WARNING: To assure product SAFETY and RELIABILITY,
repairs, maintenance and adjustment (including brush
inspection and replacement, when applicable) should
be performed by a D
D
WALT authorized service center. Always use identical
e
replacement parts.
Register Online
Thank you for your purchase. Register your product now for:
WARRAnTY sERViCE: Registering your product will
help you obtain more efficient warranty service in case
there is a problem with your product.
COnFiRMATiOn OF OWnERshiP: In case of
an insurance loss, such as fire, flood or theft, your
registration of ownership will serve as your proof
of purchase.
FOR YOUR sAFETY: Registering your product will
allow us to contact you in the unlikely event a safety
notification is required under the Federal Consumer
Safety Act.
Register online at www.dewalt.com
English
WALT factory service center or a
e
9

Publicité

Table des Matières
loading

Table des Matières