Spray Arms - Haier DW12-PFE8 Série Mode D'emploi

Spray arms

Lime and remnants of food in the washing water
can block the nozzles in the spray arms " 10 "
and " 11 " and the arm mountings.
Inspect the nozzles in the spray arms for blocked
holes due to remnants of food.
If necessary, pull the lower arm " 11 " upwards
and lift it off.
Unscrew the upper spray arm " 10 ".
Clean both spray arms under running water.
Refit the spray arms. Ensure that the lower arm
has locked into place and the upper one is
screwed tight.
Ensure that the power supply is turned off prior
to removal and cleaning of any internal pars.
27
EN
10
11