EINHELL TK 600 Mode D'emploi page 17

AnleitungTK 600_1 22.07.2005
with the push stick (3) through to the end of the
splitter (5).
There is no push block supplied with the saw!
(Available from your specialist dealer)
10. Maintenance
Remove dust and dirt regularly from the
machine. Cleaning is best done with compressed
air or a rag.
Never use caustic agents to clean plastic parts.
11. Orders for replacement parts
Please quote the following information on all orders
for replacement parts:
Type of product
Article number of the product
ID number of the product
Replacement part number of the part required
For our latest prices and information please go to
www.isc-gmbh.info
Item No. Art. No.
2 43.407.00.01
3 43.403.10.59
4 45.020.46
6 43.407.01.01
7+12+16+17 43.407.01.02
11 43.407.01.03
14 43.406.00.33
15 43.407.01.04
14:42 Uhr Seite 17
GB
17