Felco 880/100-100 Manuel D'utilisation page 16

6
6. Connect the cable connector to the extension pole
connector (6) and make a loop with the cable in the cable
fastener (7).
7
7. To pull down a branch that does not fall off after it is cut, you
can use the hook (10) provided for this purpose.
To lock/unlock the hook (10), pull the ring or the cord with the
index (9). Position the hook in the required position. Lock the
hook in position by releasing the ring or cord.
Refer to the operating manual for the different operating
modes of the electric pruning shears (FELCO 801, FELCO
811 or FELCO 820). The FELCO 880/100-100 and/or
FELCO 880/100-150 extension poles extends the pruning
shears and offers the same features as the electric pruning
shears.
16 ENGLISH
REPLACING THE INSERTS
A
A. Open the tool attachment system (1) and take the inserts
(11) out of the tool attachment system (1). Dispose of the
used parts.
B
B. Take the new inserts (11) and insert them on the two parts
of the tool attachment system (1), taking care to direct them
correctly.
Make sure that the inserts (11) are inserted correctly. If not,
you will not be able to connect your electric pruning shears
(FELCO 801, FELCO 811 or FELCO 820) to the FELCO
880/100-100 and/or FELCO 880/100-150 extension poles.