Troubleshooting - Tecnolux JC16CA20B Mode D'emploi

8.

Troubleshooting

Problems
The air
conditioni
ng does
not work.
The
cooling
effect is
not good
Reasons
There is no electricity.
The overflow indicator
displays "FL".
The ambient
temperature is too low
or too high
In cooling mode, the
room temperature is
lower than the set
temperature; in heating
mode, the room
temperature is higher
than the set
temperature.
In dehumidification
mode, the ambient
temperature is low.
There is direct sunlight.
Doors or windows are
open; there are a lot of
people; or in cooling
mode, there are other
sources of heat.
The filter screen is dirty.
The air inlet or outlet is
blocked.
Solutions
Turn it on after
connecting it to a socket
with electricity.
Discharge the water
inside.
Recommend to use the
temperature of 7-35 ℃
machine in at the
(44-95 ℉).
Change the set
temperature.
The machine is placed in
a room with an ambient
than 17 ℃ (62 ℉).
temperature of greater
Pull the Curtain.
Close doors and
windows, and add new
air conditioning.
Clean or replace the
filter screen.
Clear obstructions.