Settings In The Osd Menu; Menu Page Picture Or Pc; Picture Settings - Monacor TFT-1002LED Mode D'emploi

6.11 Settings in the OSD menu

Via the OSD (on-screen display) menu, the monitor
can be matched to the corresponding application .
To change the menu language (factory-set to Eng-
lish), go to the menu item Language on the menu
page OSD Setup .
Operation of the menu
1) Press the button "Menu / OK" to call up the
menu: You will enter the highest menu level
(page selection bar) . The menu has five pages
which are marked with a corresponding icon .
2) Use the button
the page selection bar .
3) To go to the page selected, press the button
"Source / " . The first menu item is highlighted
and thus selected .
4) Use the button
on the page .
5) Press the button "Source / " to call up the
menu item selected . The menu page disappears
and only the current setting of the menu item
is indicated:
– If a value can be adjusted for the menu item by
means of a bar graph (e . g . value for a picture
parameter), use the button
value or the button
– If multiple setting options are available for
the menu item (e . g . "On" or "Off" or selec-
tion of the menu language), use the button
"Source / " to select the option .
To exit the menu item, press the button "Menu /
OK" . The menu page will reappear .
Note: Some menu items are used to activate a function
by pressing the button„Source / ":
☞ Auto Adjust (chapter 6 .11 .1), Recall (chapter 6 .11 .3),
Swap (chapter 6 .11 .5) .
6) To exit the menu page, press the button "Menu /
OK" . To completely exit the menu, press the
button "Menu / OK" once again .
When no button is pressed, the menu will
automatically disappear at the end of the display
time set in the OSD menu (OSD Time
ter 6 .11 .3) .
20
or to select the page on
 
or to select a menu item
 
to increase the

to reduce the value .


6.11.1 Menu page Picture or PC

or
According to the video source, the menu page will
be displayed in different versions:
Version Picture
(Sources AV, HDMI, HDMI 2)
Picture Mode
Contrast, Brightness, Hue, Saturation, Sharpness
Set the desired value for the corresponding
parameter .
Sources AV, HDMI, HDMI 2: When a value is
changed, the monitor will go to the mode User
(see below) .
Color Temp.
Select one of the colour modes Normal, Warm,
Cool, sRGB (usual standard for computer applica-
tions, available for the source PC only) or User . For
the option User, individual values for the compo-
nents of red, green and blue can be adjusted: Use
the button
Green or Blue, press the button "Source / " to call
it up, use the button
press the button "Menu / OK" to return .
Auto Adjust
When the menu item has been activated with
the button "Source / ", the picture will be auto-
matically adjusted . Any manual value settings for
H Position and V Position on the menu page Advance
will be corrected .
Picture Mode
Select one of the modes Standard, Movie, Vivid
☞ chap- or User . When the values of the parameters
Contrast ... Sharpness are changed, the monitor
will automatically go to the mode User and save
the modified values for this mode . For the other
three modes, the values are preset .

Picture settings

Contrast
Brightness
Hue
Saturation
Sharpness
Color Temp.
DNR
DLC
or to select the parameter Red,
 
or
 
Version PC
(Source PC)
Contrast
Brightness
Color Temp.
Auto Adjust
Sharpness
to set its value and