Mounting; Power Supply; Ventilation; Wall Mount - Abus TVAC10012 Manuel Utilisateur

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 42

6. Mounting

6.1 Power supply

Before starting installation, ensure that the power supply voltage and the rated voltage on the power
supply unit are identical.

6.2 Ventilation

Please provide sufficient ventilation. The cooling openings may not be covered for sufficient ventilation.

6.3 Wall Mount

For mounting the monitor at a wall please use a VESA compatible wall mount. At the backside of the
monitor there are squarely arranged assembly holes (Middle distance 75 mm). These are compatible with
the ABUS TVAC10500 wall mount.
Please also pay attention to the installation manual of the wall mount.
During the mounting of the TFT monitor it must be separated from the mains voltage.

7. Button description

Button
Description
Select one of the different input signals:
HDMI (digital signal input)
SOURCE
VGA (PC or DVR signal input)
AV1 or AV2 (composite signal inputs)
Select a submenu or confirm a selected value
Show the OSD (on-screen display)
MENU
Exit a menu item and the menu
Navigate between menu items
+
Increase the value in the OSD
Increase the volume during operation
Navigate between menu items
-
Reduce the value in the OSD
Decrease the volume during operation
POWER
Switch monitor on/off
29
English

Publicité

Table des Matières
loading

Table des Matières