Setting Up/Operation - Stadler Form Max Mode D'emploi

• the appliance is not splash-proof.
• do not store or operate the appliance outdoors.
• store the appliance in a dry place inaccessible to children (pack the
appliance).
Cleaning
• Before servicing the humidifier and after each occasion of use, switch off
the appliance and unplug the mains cable from the socket.
• Never immerse the appliance in water (danger of short-circuit).
to clean the appliance, only wipe it down with a damp cloth and then dry
it carefully. always take out the mains plug first.
• take care that the air intake and outflow grilles do not become excessively
dusty; clean them occasionally with a dry brush or vacuum cleaner.
Repairs/disposal
• repairs to electrical appliances must only be carried out by a qualified
electrical technician. if improper repairs are carried out, the guarantee
lapses and all liability is refused.
• never operate the appliance if the adaptor or plug is damaged, after it has
malfunctioned, if it has been dropped or has been damaged in any other
way (cracks/breaks in the casing).
• do not push any object into the appliance. do not disassemble the purifier.
• if the appliance is beyond repair, make it unusable immediately and hand
it in at the collection point provided for the purpose.
• do not dispose of electrical appliances in the domestic waste. Please use
the communal collection points.
• ask your local authority if you do not know where the communal collec-
tion points are located.
• if electrical appliances are disposed of thoughtlessly, exposure to the
elements may cause hazardous substances to find their way into the
groundwater and from there into the food chain, or to poison the flora and
fauna for many years to come.
• if you are replacing the appliance with a new one, the seller is legally
obliged to take back the old one at least free of charge for disposal.

Setting up/operation

1. having set up the MaX heater in the desired position, insert the mains
cable (7) into the mains socket (6) on the appliance and connect the cable
(7) to the household supply socket.
2. switch on the MaX to the desired level by means of the rotary control (1).
Rotary control (1)
Position 0 = Off
Position = Ventilation, turn the room-thermostat rotary control (2)
Position i = heating, 1000 watt
Position ii = heating, 2000 watt
clockwise as far as the stop