Dynamic Range Control (Drc); Operating The Radio; Setting The Clock & Date - THOMSON RCD305UDABBT Manuel D'utilisation

Dynamic Range Control (DRC)

In DAB mode:
You can use this dynamic range control signal to expand or compress the audio signal's dynamic range
(the difference between the loudest and quietest sounds).
The sound will be more suited to your listening conditions and your own personal listening requirements,
e.g. in a noisy environment, where quiet sounds might be drowned out, setting the compression to
maximum will 'boost' the quiet sounds, whilst keeping the loudest sounds at their original level.
There are 3 levels of compression:
• DRC off: No compression. This is the default setting.
• DRC low: Medium compression.
• DRC high: Maximum compression.
1. Press and hold the MENU to enter the DRC.
2. Press "Select" to confirm the function. The current DRC setting will have an "*" next to it.
3. Turn Tuning /Select (14) to move through the options and press Select to confirm.
4. Press Menu again to exit from the Menu.

Operating The Radio

A) Auto Scan
1. Press the Power button
2. Set the Function button (6) to the FM TUNER position.
3. Press the PLAY/PAUSE button (9) for 2 seconds to start the AUTO SCAN function and automatically
search for radio stations for 3 minutes. The screen displays the digits and station numbers. Once
complete, the unit will store a maximum of 20 preset stations.
4. Press MODE/CLOCK SET to track back the saved stations & listen to your desired stations.
B) Tuning/Select
1. Set the Function button (6) to the FM TUNER position.
2. Turn the Tuning control knob (14) to automatically tune in to the next station.
3. Adjust the Volume (4) to the desired level.
4. Press the Power button
C) Storing Stations in Memory Positions P01 to P20
1. Set the Function button (6) to the FM TUNER position.
2. Long press the MODE/CLOCK SET button (13).
3. Tune in left & right to the desired station. The current position number will flash in the display, e.g.
'P01, P02... P20'.
4. Press Tuning /Select (14) to save the station number.
5. Press MODE/CLOCK SET to track back the saved stations & listen to your desired stations.
Antenna
Extend the antenna to obtain the best reception. You may need to turn or change the unit's position to
improve reception.
Setting The Clock & Date
1. Press the Power button
2. Press the MODE/CLOCK SET button (13) and hold for 2 seconds: the display will flash. Turn
Tuning left and right to select the time format (12 hrs or 24 hrs). Press MODE/CLOCK SET to
confirm the format.
3. Turn Tuning left and right to select the hour. Display will blink. Press MODE/CLOCK SET to set
the hour.
4. Turn Tuning left and right to select the minute. Display will blink. Press MODE/CLOCK SET to set
the minute.
(5) to turn the unit on.
(5) to turn the radio off.
(5) to activate the unit in standby mode.
- EN 6 -