Mute Function; Handset Volume Setting; Speaker Volume Setting; Tone Control Setting - Geemarc CL320 Notice D'utilisation

USING THE TELEPHONE

Mute Function

If you wish, you can speak privately to someone else in the room
without your caller overhearing. You will still be able to hear the
caller but they cannot hear you during the mute operation.
To switch on the mute mode during a call just press and hold
button. Your caller will not be able to hear you anymore. Release
to resume the conversation with your caller.

Handset Volume Setting

During a call, the handset volume can be adjusted to one of 10 levels
using the control knob located on the handset cradle of the CL320
unit. When the handset volume is set to anything greater than "0",
the handset volume LED will light up.
Note: Setting the receiver volume to maximum may under certain
circumstances, cause ear damage. Therefore, it is recommend that
you reset the volume to "0" after each call.

Speaker Volume Setting

During a call in handsfree mode, you can adjust the speaker volume
to a desirable level. Simply use the slide control located on the right
of the CL320 unit

Tone Control Setting

During a call, in handsfree mode, you can adjust the tone to a
desirable level. Simply use the slide control located on the right of
the CL320 unit
Note: Tone adjustment is not possible when the receiver volume is
set to its minimum level.
20