Usb Recording - Sharp RP-20 Mode D'emploi

Listening to a USB mass storage device (continued)

■ USB recording

1
Insert a USB memory device into the USB terminal.
2
Press the FUNCTION button to select the PHONO
function and put a vinyl record onto the turntable.
3
Press and hold the REC button and then press
or
: 96 kbps or 128 kbps or 256 kbps.
4
Press the REC button to record tracks into the USB
device.
5
Play the vinyl record (refer "Listening to a vinyl re-
cord" on page 7)
6
To stop the recording: Press the REC button again to
stop record in recording mode.
7
To cancel the recording: Press the
once. "CANCEL" will flash on the display. Within 3 sec-
onds, press this button again.
8
To add recording quantity: During recording, press
button.
Notes:
● If error occurs, "REC ERR" will appear on the display.
The current recording process will automatically
cancelled.
● "MEM FULL" appears if the memory of the USB device
is full during recording.
● "NO MEDIA" appears if no USB device is connected.
to select desired encoding quality
/CLEAR button
USB
Notes:
● SHARP will not be held liable for the loss of data while
the USB memory device is connected to this product.
● Files compressed in MP3 format can be played back
when connected to the USB terminal.
● This USB memory's format supports FAT 16 or FAT 32.
● SHARP cannot guarantee that all USB memory
devices will work on this product.
● USB cable is not recommended for use in this product
to connect to USB memory device. Use of the USB
cable will affect the performance of this product.
● This USB memory cannot be operated via USB hub.
● The USB terminal in this unit is not intended for a PC
connection.
● External HDD-storage cannot be played back via USB
terminal.
● If the data inside the USB memory is large, it may take
longer time for the data to be read.
● This product relates to USB mass storage devices. It
may however face some irregularities due to various
unforeseen reasons from some devices. Should this
happen, turn off the unit and then turn it on again.
E-11