AEG FEE63600PM Notice D'utilisation page 37

Masquer les pouces Voir aussi pour FEE63600PM:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

How to set the rinse aid level
Make sure the appliance is in user mode.
1. Press Delay.
• The indicators
and
• The indicator
• The display shows the current
setting: e.g.
– The levels of rinse aid range
from 0A to 6A where level 0A
means no rinse aid is used.
2. Press Delay repeatedly to change
the setting.
3. Press on/off to confirm the setting.
6.5 AirDry
AirDry improves the drying results with
less energy consumption.
During the drying phase, the
door opens automatically
and remains ajar.
CAUTION!
Do not try to close the
appliance door within 2
minutes after automatic
opening. This can cause
damage to the appliance.
If, afterwards, the door is
closed for another 3
minutes, the running
programme ends.
,
are off.
still flashes.
= level 4.
AirDry is automatically activated with all
programmes excluding
applicable).
To improve the drying performance refer
to the XtraDry option or activate AirDry.
CAUTION!
If children have access to the
appliance, it is advised to
deactivate AirDry as opening
the door may pose a danger.
How to deactivate AirDry
Make sure the appliance is in user mode.
1. Press Option.
• The indicators
and
are off.
• The indicator
flashes.
• The display shows the current
setting.
= AirDry is deactivated.
= AirDry is activated.
2. Press Option to change the setting.
3. Press on/off to confirm the setting.
ENGLISH
37
(if
,
still

Publicité

Table des Matières
loading

Table des Matières