Height Adjustment - Joie i-Spin Safe Mode D'emploi

Height Adjustment

for Head Support and Shoulder Harnesses
see images -
18 20
1. Please adjust the head support
and check if the shoulder
harnesses are at the correct
height according to
18
!
When used rear facing, the
shoulder harness height must be
even with or below the top of
child's shoulders.
18
2. Squeeze the head support
adjustment lever , meanwhile
19
pull up or push down on the head
support until it snaps into one of
the 6 positions. The head support
positions are shown as
20
15
18
19
1
.
20
Using in the Rear Facing Mode
(Child height 40cm-105cm/Child weight
18.5kg/infant - 4 years old)
see images
!
Please install the enhanced child
restraint on the rear vehicle seat,
and then put the child in the
enhanced child restraint.
1. Press the ISOFIX adjuster button
21 -1 and pull the base back from
the vehicle seat.
2
2. Press the rotating button to rotate
for easier side loading/unloading
of the child, then rotate the seat
to the rear facing position.
!
Press the rotating button on either
side to rotate the enhanced child
restraint.
-
21 32
21
22
-2
21
&
22 23
2
1
16