Technical Data; Montage - Scheppach 5906501901 Traduction Du Manuel D'origine

Masquer les pouces Voir aussi pour 5906501901:
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 23
15. If you want to use permanent drainage, make
sure that the hose is not banded and the water
can fl ow through unhindered. Don´t use perma-
nent drainage when temperatures are very low
and the water could freeze.
16. Protect the device from splashing water.
17. Only use an earthed standard socket with a 220-
240V AC connection.
18. This appliance can be used by children aged
from 8 years and above and persons with re-
duced physical, sensory or mental capabilities or
lack of experience and knowledge if they have
been given supervision or instruction concerning
use of the appliance in a safe way and under-
stand the hazards involved. Children shall not
play with the appliance. Cleaning and user main-
tenance shall not be made by children without
supervision.
19. Drain the water container before transporting the
device to prevent spills.
20. Unplug the device if problems like smell of burn-
ing occur while using it.
Warning! This electric tool generates an electro-
magnetic field during operation. This field can impair
active or passive medical implants under certain
conditions. In order to prevent the risk of serious or
deadly injuries, we recommend that persons with
medical implants consult with their physician and the
manufacturer of the medical implant prior to operat-
ing the electric tool.
SAFETY INFORMATIONS SERVICE/ MAINTE-
NANCE
1.
Only original parts may be used for maintenance
and accessories.
2.
Before using, always visually inspect to see that
the tools are not worn or damaged. Replace
worn or damaged elements and bolts. Keep all
nuts, bolts and screws tight to be sure the equip-
ment is in safe working condition.
Service information
Please note that the following parts of this product
are subject to normal or natural wear and that the
following parts are therefore also required for use as
consumables.
Wear parts*: Carbon brushes
* Not necessarily included in the scope of delivery!
m WARNING!
Improper maintenance or ignoring/ not rectifying a
problem during the operation may become a source
of danger. Operate your machine only if regular-
ly maintained. Only in this way you can assume that
your device is operating safe, economical and with-
out malfunctions.
Do not clean, maintain, setup or repair the ma-
chine whilst running. Moving parts may cause
serious injuries.
Do not use fuel or other flammable solvents to clean
the equipment.
Repairs must be carried out by qualified experts with
appropriate knowledge about the product.
If the supply cord is damaged, it must be replaced by
the manufacturer, its service agent or similarly quali-
fied persons in order to avoid a hazard.
RESIDUAL RISKS
Even if used properly, residual risks can exist even if
the relevant safety regulations are complied with due
to the design determined by the intended purpose. Re-
sidual risks can be minimised if the "Safety advices"
and the "Intended usage" as well as the whole of the
operating instructions are observed. Observing these
instructions, and taking proper care, will reduce the
risk of personal injury or damage to the equipment.
• Risk from electricity when using improper electrical
connections.
• Touching live parts of opened electrical components.
In addition, in spite of all t he precautionary measures
taken, non-obvious residual risks can still exist.

6. Technical data

Model
Protection class
Rated power
Max. power
Electrical power supply
Rated current
Temperature range
Humidity of air range
Dehumidification performance at
(30°C/80%)
Refrigerant
Refrigerant quantity
Tank volume
Self purging
Pump power
Air flow rate (m3/h)
Room area
Hose length
Pump hight
Display
Weight
Subject to technical modifications!

7. Montage

Attaching wheels and handle Fig. 2 + 3
1. Attach the wheels, support feet and handle.
2. Secure both sides of the support feet in the holes
provided on the casing using 3 screws each.
3. Insert the handle between the support feet and
screw both sides down.
4. To attach the wheels, first tighten the wheel axle on
the underneath of the dehumidifier..
GB
DH6000
IP20
900 W
1150 W
230 V / 50 Hz
4,5 A
5° - 35°C
30% - 80%
60 L/d
R407C
410 g
6 L
N/A
N/A
350 m
/h
3
70m
2
N/A
N/A
Yes
32 kg
19 І 76
19 І 76
19 І 76

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Dh6000

Table des Matières