Table des Matières
Publicité
2 SÉCURITÉ
2.4 Emplacement des autocollants de sécurité - ANSI
Les étiquettes de sécurité se trouvent dans/sur la machine aux emplacements
indiqués. (Les descriptions des symboles figurent à la section 2.3)
3
Crush Hazard
Death or serious injury can result
from contact with moving lift arm or
attachment.
1
Fall Hazard
Use the provided access system when
Serious injury or death can result
entering or exiting the machine.
from falling.
2030-597
10
Crush Hazard
Death or serious injury can result
from contact with moving lift arm or
attachment.
Légende
1.
Risque de chute
2.
Risque d'injection (d'huile) à travers la peau
3.
Risque d'écrasement (bras de levage)
4.
Risque d'incendie (voir le manuel)
5.
Risque de brûlure
6.
Risque de brûlure/explosion (voir le manuel d'utilisation)
7.
Emplacement des points d'attache
8.
Nettoyage des étiquettes du châssis porteur
9.
Risque d'écrasement (retournement)
10. Risque d'écrasement (renfort de bras de levage)
2
Escaping fluid under pressure can
penetrate skin, causing serious injury.
Keep clear of lift arms and
attachments.
2030-592
Install lift arm brace prior to servicing.
2030-594
•
Relieve internal pressure before
disconnecting any line or fitting.
•
Keep away from leaks or pinholes.
•
Use cardboard to check for leaks.
Fluid injected into skin must be surgi-
Injection Hazard
cally removed within a few hours by a
doctor familiar with this type of injury
or gangrene will result.
2030-602
4
Read Operator's manual
Fire Hazard
Keep engine, exhaust and chassis
Flammable debris can collect near hot
areas free of debris.
components and lead to a fire.
9
CRUSH HAZARD
Contact with moving machine can
Keep clear of moving machine.
result in death or serious injury.
2030-593
14
5
Allow the machine to cool thoroughly
Burn Hazard
before opening.
Hot fluid under pressure can scald.
2030-599
6
Explosion/Burn Hazard
Will cause death, burns or
blindness due to ignition of
explosive gasses or contact
with corrosive acid.
•
Keep all flames/sparks
away!
•
No Smoking!
•
Read and understand
all manuals prior to
operation.
2030-603
7
8
NOTICE
Inspect undercarriages daily for
accumulation of debris. If debris
is present, clean thoroughly with
a pressure washer. If debris is
allowed to build up, it can cause
premature component wear and
decrease machine performance.
2085-253
2030-595
Publicité
Chapitres
Table des Matières
