Maintenance; Dressing Grinding Wheel; Cleaning; Disposal - HOLZMANN MASCHINEN NTS 250 Manuel D'utilisation

16

MAINTENANCE

Don't clean or do maintenance on the machine while it is still connected
to the power supply:
Damages to machine and injuries might occur due to unintended
switching on of the machine!
Therefore: Switch the machine off and disconnect it from the power
supply be-fore any maintenance works or cleaning is carried out
The machine does not require extensive maintenance. If malfunctions and defects occur, let it be
serviced by trained persons only.
Check regularly the condition of the security stickers. Replace them if required. Check regularly the
condition of the machine.
Clean your machine regularly after every usage – it prolongs the machines lifespan and is a pre-
requisite for a safe working environment.
Repair jobs shall be performed by respectively trained professionals only!
Store the machine in a closed, dry location.

16.1 Dressing grinding wheel

Depending on the type of grinding you do, the grinding wheel may require periodic dressing.
NOTICE: If the diameter of the grinding wheel will be smaller the set angle with the
angle guide will be different!
A dressing tool of HOLZMANN-MASCHINEN can be used to restore the abrasive wheel edge back to
a square form quality of the wheel surface and bring the wheel edge back to a square form

16.2 Cleaning

After each workshift the machine has to be cleaned.
Remove, empty and clean the water reservoir after each workshift!
The usage of certain solutions containing ingredients damaging metal
surfaces as well as the use of scrubbing agents will damage the machine
surface!
Clean the machine surface with a wet cloth soaked in a mild solution

16.3 Disposal

Do not dispose the machine in residual waste. Contact your local authorities for
information regarding the available disposal options. When you buy at your local dealer
for a replacement unit, the latter is obliged to exchange your old.
HOLZMANN MASCHINEN GmbH
A T T E N T I O N
N O T I C E
www.holzmann-maschinen.at
N O T I C E
MAINTENANCE
.
25
NTS 250 / NTS 250PRO