Assembly - HOLZMANN MASCHINEN NTS 250 Manuel D'utilisation

14

ASSEMBLY

Please check the product contents immediately after receipt for any eventual transport damage or
missing parts. Claims from transport damage or missing parts must be placed immediately after
initial machine receipt and unpacking before putting the machine into operation. Please understand
that later claims cannot be accepted anymore.
Grinding wheel:
Place the grinding wheel on the left side of drive shaft
and fix with washer and nut.
Polishing wheel:
 Place polishing wheel (covered with leather) on the
right side of the drive shaft
 Mount the polishing wheel so that the slots engage
on the wheel and shaft into each other.
 Fix the polishing wheel with fixing screw and washer.
Water reservoir:
The water reservoir is equipped with mounting tabs
used to hook to the slots on the grinder body.
Universal support:
2 positions (horizontal or vertical).
Place the universal support in the
brackets and fix in desired position.
Tool rest:
Insert the tool rest over the universal support
HOLZMANN MASCHINEN GmbH www.holzmann-maschinen.at
ASSEMBLY
22
NTS 250 / NTS 250PRO