Digital Audio Broadcasting (Dab) - Pioneer MVH-S520DAB Mode D'emploi

4
Turn the M.C. dial to select an option, then press to confirm.
Menu Item
FM STEP
[100], [50]
REAR-SP
[FUL]
[SW]
SYSTEM UPDATE
[SYSTEM INFO], [S/
W UPDATE]
DAB ANT PW
[ON]
[OFF]
SYSTEM RESET
[YES], [NO]

Digital Audio Broadcasting (DAB)

To receive DAB signals, connect a DAB antenna (AN-DAB1) (sold separately) to the unit.
Seeking a service component/station
1
Press SRC/OFF to select [DIGITAL RADIO].
2
Press BAND/
3
Press /
NOTE
Press and hold /
receives a service.
Description
Select the FM tuning step from 100 kHz or 50 kHz.
Select when there is a full-range speaker connected to the rear
speaker output leads.
Select when there is a subwoofer connected directly to the rear
speaker output leads without any auxiliary amplifier.
Select [SYSTEM INFO] to confirm the latest system information
on the unit.
Select [S/W UPDATE] to update the unit to the latest software
and initialize the unit settings. For details on the latest software
and updating, visit our website.
Supply power to a DAB antenna. Select this when using the
optional DAB antenna (AN-DAB1, sold separately) with the unit.
No power is supplied to a DAB antenna. Select this when using a
passive antenna with no booster.
Select [YES] to initialize the unit settings. The unit will be
restarted automatically.
to select the band from [D1], [D2] or [D3].
to select a service component/station.
then release to seek an available service. Scanning stops when the unit
- 7 - - 7 -