VEVOR YT-19 Manuel page 4

1.This equipment is only applicable to ceramic drawings and cannot be used for
other purposes. Do not use the equipment brutally.
2.The equipment shall be placed on a cool, ventilated, dry, dust-proof and level
ground.
3.Users must wire and install according to electricity safety standards.
4.Do not change the rotation direction when the motor is running. To change the
rotation direction, stop it first, and start it after the motor completely stops rotating.
5.Please use a towel or sponge to clean the machine body, and do not use a lot of
water to wash it to avoid water immersion in the motor, switch, bearing, and other
parts, causing failure.
6.Before use, make sure that the switch and pedal are in the stop position before
inserting the power.
7.When repairing or replacing parts, the switch must be cut off and the power
supply must be unplugged.
8. If the supply cord is damaged, it must be replaced by the manufacturer, its
service agent or similarly qualified persons in order to avoid a hazard.
9.Children should use this equipment with adults(Note: This appliance can be
used by children aged from 8 years and above and persons with reduced physical,
sensory or mental capabilities or lack of experience and knowledge if they have
been given supervision or instruction concerning use of the appliance in a safe
way and understand the hazards involved. Children shall not play with the
appliance. Cleaning and user maintenance shall not be made by children without
supervision).
10.Periodically check whether the power cable is damaged and the connector is
loose.
11.Press the button on the leakage protector once a month to check whether the
leakage protection can work normally!
SAVE THESE INSTRUCTIONS
FCC Information
3