INSTALLATION
WARNING: RISK OF ELECTRIC SHOCK
•
Disconnect power to switch at the circuit breaker.
•
If you are unsure about any of the instructions,
consult a qualified electrician.
•
Test the existing light switch to make sure the circuit
breaker is off.
NOTE
•
Installation by a qualified electrician is strongly recommended.
•
Relay can only be used with a single or double gang box.
Do not install in a multi-gang box unit.
•
Replaces single or double light switches not wired
to an AC outlet.
We recommend installing Relay in a double gang box
so you will have the ability to control two light loads
rather than one.
17