Zodiac X7 Quattro Notice De Montage Et D'utilisation page 23

Notice X7 ANG 2010.qxd 12/07/10
Figure 25
Diaphragm
Figure 26
Figure 28
Figure 29
10:32 Page 12
2 3
•
Then simply remove the Diaphragm from the holder by pulling
it upward (Figure
•
2 nd step: fitting the new Diaphragm
Figure 27
Ring
•
Place the upper part of the case in the lower part and screw the
2 parts together.
•
Reinsert the case in the device, after having put the tightening
ring back in place
•
Reposition the housing around the case
•
Place the handle upright and push the clips back into place.
25).
•
Place the new Diaphragm
on the handle and replace the
handle in the casing by aligning
the notches correctly with
the grooves
•
Pull on the handle so as
to ensure that the edge of
the Diaphragm is visible
(Figure
(Figure 28).
(Figure 26).
27).
(Figure 29).