Initial Settings Menu Using The Initial Settings Menu; Video Output Settings - Pioneer DCS-575 Mode D'emploi

09 Initial Settings menu
Chapter 9
Initial Settings menu
Using the Initial Settings menu
The Initial Settings menu provides audio and
video output settings, parental lock settings,
and display settings, among others.
If an option is grayed out it means that it
cannot be changed at the current time. This is
usually because a disc is playing. Stop the
disc, then change the setting.

Video Output settings

Setting
TV Screen
(See also Screen sizes
and disc formats on
page 44.)
AV Connector Out
(See Connecting auxil-
iary components on
page 34.)
HDMI Resolution*
(See Connecting using
HDMI on page 36.)
* Default changes with
TV format (PAL/NTSC).
Note
1 • In the table, the default setting is shown in bold: other settings are shown in italics.
• Some settings, such as TV Screen, Audio Language and Subtitle Language may be overridden by the DVD disc. Often
these settings can also be made from the DVD disc menu.
• The AV Connector Out setting only needs to be set if you have connected this player to your TV using a SCART cable.
• The HDMI Resolution and HDMI Color settings only need to be set if you connected this player to an HDMI-compatible
component using the HDMI connector.
2 This setting can only be used when you are connected via HDMI and have the HDMI resolution set to 1920x1080p, 1920x1080i
or 1280x720p. When using this setting, only the HDMI connection is available.
30
En
Option
4:3 (Letter Box)
4:3 (Pan & Scan)
16:9 (Wide)
16:9 (Compressed)
Video
S-Video
RGB
1920x1080p
1920x1080i
1280x720p
720x480p (NTSC)/
720x576p (PAL)
720x480i (NTSC)/
720x576i (PAL)
1 Press DVD/CD.
2 With playback stopped, press HOME
MENU and select 'Initial Settings'.
Use /// and ENTER to select the
3
setting and option you want to set.
All the settings and options are explained on
the following pages.
What it means
Set if you have a conventional 4:3 TV. Widescreen movies are
shown with black bars top and bottom.
Set if you have a conventional 4:3 TV. Widescreen movies are
shown with the sides cropped so that the image fills the screen.
Set if you have a widescreen TV.
Set if you have a widescreen TV. 4:3 material is shown with
black bars on either side of the screen.
Standard video, compatible with all TVs.
Higher quality, but check your TV for compatibility.
Best quality, but check your TV for compatibility.
Set if your TV supports 1920 x 1080 pixel progressive-scan video.
Set if your TV supports 1920 x 1080 pixel interlace video.
Set if your TV supports 1280 x 720 pixel progressive-scan video.
Set if your TV supports 720 x 480 (NTSC)/720 x 576 (PAL) pixel
progressive-scan video.
Set if your TV supports 720 x 480 (NTSC)/720 x 576 (PAL) pixel
interlace video.
Initial Settings
1
2