8.5. Lock the operator panel
The TA750 can be locked to prevent accidental changes to the settings
(e.g. welding time, tensioning force).
To lock the operator panel proceed as follows:
Push every button twice quickly from the
left to the right, starting from SET.
After that the letter L will appear that means
"Lock". Shouldn't the letter L appear please
keep on repeating until the letter L appear.
The operator panel is now locked; the
operator cannot change any parameters.
To unlock the operator panel repeat the
procedure.
TA750
(0001)
H TA750 EU 46/17
Step 1
Step 2
2 x per
Step 3
49 / 98