Zibro D 112 Manuel D'utilisation page 55

Masquer les pouces Voir aussi pour D 112:
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 32
≥ 10 cm
≥ 10 cm
≥ 10 cm
≥ 20 cm
Always remove the plug from the electric power supply before cleaning or replacing
the unit or components of the unit.
Never use an extension cable to connect the device to the electric power supply. If
there is no suitable, earthed wall socket available, have one installed by a recognised
electrician.
Children should be supervised to ensure that they do not play with the appliance.
Have any repairs only carried out by a recognised service engineer or your supplier.
Follow the instructions for use and maintenance as indicated in the user manual of
this device.
Always remove the plug of the unit from the wall socket when it is not in use.
A damaged power cord or plug must always be replaced by a recognised electrician
or your supplier.
ATTENTION!
• Never use the device with a damaged power cord, plug, cabinet or control
panel. Never trap the power cord or allow it to come into contact with sharp
edges.
• Failing to follow the instructions may lead to nullification of the guarantee on
this device.
• Do not place the dehumidifier in bathrooms or in other places where it is
likely that water could be sprayed on the dehumidifier.
THE CONTROL PANEL
This light indicates that the defrost function has been activated. This is necessary to
prevent excessive formation of ice in the device.
This light indicates that the water container is full. The device switches off
automatically.
ON-/OFF-button
Ventilator-button
Timer button
Adjustment buttons hydrostat
Heating button (DX118)
4
55

Hide quick links:

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

D 116Dx 118D 112lcd

Table des Matières