Preparation - Dovre Astro 3MF Installation Et Mode D'emploi

.

Preparation

Please inspect the fireplace for damage caused during transport immediately after delivery and
notify.your.distributor.in.case.there.are.any.defects..Do.not.put.the.appliance.into.operation.
in.the.meantime.
In order to avoid damaging the fireplace during installation and to make its handling easier,
it is recommended to remove previously all loose parts (fire-resistant bricks, grille, ashtray,
...).from.the.stove..Note.the.location.of.those.parts.while.removing.them,.so.that.you.have.no.
difficulties in re-assembling the parts later on.
Opening and closing the door
The.door.can.be.opened.and.closed.by.means.of.the.handle.in.the.mid-
dle....
The smoke outlet
Your.stove.is.suitable.for.two.connections:.a.top.or.a.rear.connection....
Upon. supply,. the. top.
and.rear.exhausts.have.
been.left.open..Depen-
ding. on. the. position.
chosen,. one. opening.
can. be. covered. with.
the.blanking.plate.sup-
plied;.the.other.one.can.
be. equipped. with. the.
connection.collar.supp-
lied..(see.picture)..Use.
the fixings supplied and
be. sure. to. tightly. seal.
the. connection. collar.
and. the. blanking. plate.
to. the. stove. by. means.
of.the.kit.or.paste.sup-
plied..
33