English
Remove dirt and dust, and mount the parts in reverse order.
NOTE!
Handle the smoke chicane and the smoke converter plate carefully.
Interruption of operation
Smoke spillage around door
could be due to too low draught in the chimney <12Pa
• check whether the flue or chimney is blocked
• check whether the extraction hood is switched on; if it is, switch it off and open a
window/door in the proximity of the stove for a short while.
Soot on glass
could be caused by
• the firewood is closed.
• the air damper is closed
Make sure that the stove is heated properly when firing up, prior to closing the door.
Stove is burning too strong
could be caused by:
• leak around the door seal
• chimney draught too large >22 Pa, draught control regulator should be installed.
Stove is burning too weakly
could be caused by:
• too small amount firewood
• too little air supply for room ventilation
• unclean smoke channels
• leaky chimney
• leakage between chimney and flue
attika
RAIS/
- User manual for RAIS Q-TEE II / Q-Tee II C
37