Cleaning The Combustion Chamber; Cleaning Of Flue Way - RAIS/attika Q-TEE II Manuel D'utilisateur

English
Combustion chamber lining
The combustion chamber lining protects the body of the wood-burning stove against
the heat from the fire. The large temperature fluctuations may result in cracks in the
plates of the combustion chamber lining, which however have no effect on the func-
tional capacity of the wood-burning stove. They do not have to be replaced unless they
are crumbling away due to many years of use. The plates of the combustion chamber
lining are only inserted and are easy to replace by your dealer or yourself.
Movable parts
Door hinges and door locks must be lubricated as required. We recommend that only
our own lubricating spray is used, as the use of other products may lead to the forma-
tion of odours and residues. Contact your dealer to obtain the lubricating spray.

Cleaning the combustion chamber

Scrape/shovel the ash out and store it in a non-flammable container until it has cooled
down. You can dispose of ash with your normal household waste.
REMEMBER!
• Never remove all the ashes from the combustion chamber
• the wood will burn at its best with a layer of ashes of approx. 20 mm.

Cleaning of flue way

The flue ways consist of a smoke converter plate (vermaculit) and a smoke chicane (steel).
Handle these parts carefully.
Remove the smoke converter plate by tilting it to one side and turning it a little slantwise.
Pull out the plate carefully.
Then remove the smoke chicane by lifting the front, tipping it down at the back.
Carefully lift out the smoke chicane.
36
attika
RAIS/ - User manual for RAIS Q-TEE II / Q-Tee II C