Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
VF_12_T80_OM_rev1_9.indd 20-21
ASSEMBLY
WARNING
There are several areas during the assembly process when special attention must be paid. It is very important to follow the
assembly instructions correctly and to make sure all parts are firmly tightened. If the assembly instructions are not followed
correctly, the treadmill could have parts that are not tightened and will seem loose and may cause irritating noises. To prevent
damage to the treadmill, the assembly instructions must be reviewed and corrective actions should be taken.
Before proceeding, find your treadmill's serial number located on a white barcode sticker
on the base frame as shown in this image.
ENTER YOUR SERIAL NUMBER IN THE BOX BELOW:
SERIAL NUMBER:
VISION T80 TREADMILL
MODEL NAME:
SERIAL NUMBER LOCATION
21
12/12/12 2:35 PM
Publicité
Table des Matières
Dépannage
