LENCO DIR-260 Mode D'emploi page 8

Masquer les pouces Voir aussi pour DIR-260:
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

Battery Precautions:
Follow these precautions:
1.
Use only the type of battery specified in this manual.
2.
Be sure to follow the correct polarity when installing the battery as indicated in the
battery compartment. A battery which is inserted in the wrong way may cause damage
to the device.
3.
Do not try to recharge single use batteries. (Follow the battery manufacturer's
directions.)
4.
Do not throw batteries into fire because they may explode.
5.
Clean the battery contacts of the device prior to replacing empty batteries.
First use
1.
Plug the Adapter into the wall outlet, the display will appear as below.
2.
Wait for about 20 seconds, the display will appear as below. Turn the NAVIGATE knob on the
unit counterclockwise or press the navigate button on remote control to highlight "YES", and
press the OK knob on the unit or press the OK button on remote control to continue.
8

Publicité

Table des Matières
loading

Table des Matières