Part Names And Functions Of The Unit - Yamaha YSP-1400 Mode D'emploi

Part names and functions of the unit

Front panel
A Indicators
Indicate the status of the unit.
The indicators will dim automatically if no operations are performed for 5 seconds.
B Remote control sensor
Receives infrared signals from the remote control of the unit (p.8).
Receives infrared signals from the TV remote control when the TV Remote Repeater
function is enabled (p.15).
C INPUT key
Selects an input source to be played back (p.8).
D VOLUME (+/-) keys
Adjust the volume (p.8).
E
(power) key
Turns on or off (standby) the unit (p.9).
F Dual built-in subwoofers
The built-in subwoofers are located in the leg part of the unit.
HINT
• The unit will be automatically turned off when one of the following conditions is met.
− No operations for 8 hours
− No audio input and no operations for 30 minutes
Rear panel
A TV input jack
For connecting to a TV with an optical cable.
B BD/DVD input jack
For connecting to a playback device, such as a Blu-ray Disc (BD) player, with a
coaxial digital cable.
C ANALOG input jacks
For connecting an external device with an RCA stereo cable.
D PORTABLE input jack
For connecting a portable device with a 3.5 mm stereo mini plug cable.
E SUBWOOFER OUT jack
For connecting an external subwoofer with a monaural pin cable.
Switch the setting for the external subwoofer (p.16).
F TV Remote Repeater
Transmits TV remote control signals received at the TV remote control sensor to the
TV (p.15).
3