Operations - Yamaha YSP-1400 Mode D'emploi

Operations

Preparing the remote control
Peel off the protection sheet before use.
Operating range of the remote control
Remain within the operating range shown below.
Within 6 m
(20 ft)
Indicators
The indicators on the front panel flash or light up, to
indicate the operation and setting status.
8
Input keys
Select an input source to be played back.
TV ....................TV audio
BD/DVD ...........Audio from a device connected to
the BD/DVD input jack
ANALOG .........Audio from a device connected to
the ANALOG input jack
PORTABLE .....Audio from a device connected to
the PORTABLE input jack
BLUETOOTH ...Audio from a Bluetooth connected
device
The indicator for the selected input source lights up.
(Example: when TV is selected)
HINT
• To play audio of the playback device connected to the TV or
to watch videos of the playback device, set the TV's input
source to the playback device.
• For details on Bluetooth connection, refer to "Listening to the
sound from a BLUETOOTH device" (p.11).
SUBWOOFER keys (+/–)
Adjust the volume of the subwoofer.
Volume down (–) Volume up (+)
VOLUME keys (+/–)
Adjust the volume of the unit.
Volume down (–) Volume up (+)
MUTE key
Mutes the audio output. Press the key again to unmute.
Flash (on mute)
Remote control signal transmitter
1
Transmits infrared signals.
2
CH LEVEL key
While you listen to the test-tone, you can adjust
the volume level of each channel (p.15).
3