Publicité
Les langues disponibles
Les langues disponibles
with the Multi-Train System, the model
is programmed to loco address 03.
For information on programming the
loco address, see the instructions for
various MTS components.
When operating with the Multi-Train
System, you can control the loco's
functions remotely. Press the light-
ing button ("9" with remotes) to turn
the loco lights on or off. Press the
function buttons to control the fol-
lowing functions:
1: Whistle signal "crossing"
2: Brake sound
3: Bell
4: Conductor announcement:
"Schönen guten Tag. Die
Fahrkahrten bitte." ("Good day.
Tickets please.")
5: Flickering firebox and coal
shoveling sound off/on
6: Cylinder clearing sound on/off
7: Smoke generator off/on
8: Sound off/on
With a Loco Remote or Universal
Remote, press the numbered loco
function buttons. For example, to
trigger the brake sound, press button
"2" on the Loco Remote or Universal
Remote. You can reprogram the
sounds that are triggered by the
function buttons, from a list of avail-
able sounds (see Instructions for
advanced users).
When using the MTS components
marked with a "p," this loco can
receive "parallel" function com-
mands, which eliminate the pause
that occurs when a "serial" command
is received.
Parallel: Command is send directly.
Serial: Command is send as a string
of "1" commands, for example, 3 = 1
+ 1 + 1).
Most MTS components can be
upgraded to parallel function com-
mands (Exceptions: first generation
LGB 55000 MTS Central Station,
LGB 55010 Train Mouse). For more
information, contact your authorized
retailer or go to www.lgb.com.
When operating with the Multi-Train
System, the loco features a "Back-
EMF" function. This keeps the motor
speed constant (and under normal
conditions the loco speed), even
when the load of the loco changes,
for example, in curves or on grades.
This feature does not work at top
speed, because additional voltage
must be available to overcome any
added load.
If desired, numerous functions of the
onboard decoder, such as accelera-
tion, braking, direction of travel and
many others, can be programmed
using a PC and the LGB 55045 MTS
PC Decoder Programming Module
(see Instructions for advanced
users). These functions also can be
programmed with the LGB 55015
Universal Remote.
Lighting
This model features directional light-
ing. The model has a "flat" multi-pur-
pose socket, with a removable cover,
on the rear wall (Fig. 3). This socket
can be used to provide track power
to LGB cars with lighting or sound
electronics.
To remove the cover of the socket,
pull it straight out. If the cover is
tight, gently use a small straight
screwdriver to pry it out. (Do not pull
out the rectangular outer housing.)
Smoke Generator
This model is equipped with a smoke
generator. A small supply of LGB
Smoke and Cleaning Fluid is included
with this model. For best operation,
fill the generator halfway with fluid. If
the generator is overfilled, it will not
convert the fluid into smoke.
17
Publicité
